Unit Conversions of Logger Data in Collect

<< Click to Display Table of Contents >>

Navigation:  Collect > Logger Integration >

Unit Conversions of Logger Data in Collect

Collect can convert between the following units when capturing logger data in Collect Mobile. For example, if the temperature unit selected when setting up the form in Collect Enterprise (see Setup Form) is °F, but the data logger only provides the temperature in °C, Collect Mobile will convert the temperature from °C to °F.

 

Unit Group

Converts Between

Concentration

ppb (parts per billion)

ppm (parts per million)

ppt (parts per thousand)

Conductivity

mS/cm

mS/m

S/m

uS/cm

Density/Mass Concentration

g/cm3

g/L

kg/L

kg/m3

mg/L

ug/L

Distance/Length

cm

ft

in

km

m

mm

Flow

acre-ft/day (acre feet per day)

ft3/day

ft3/hr

ft3/min

ft3/s

L/s

m3/day

m3/hr

m3/min

m3/s

Pressure

Bar

cmH2O (4 °C) (centimeters of water at 4 °C)

inH2O (4 °C)

inHg (0 °C) (inches of mercury at 0 °C)

kPa

mBar

mmHg (0 °C) (but not mmHg without a temperature)

Pa

PSI (but not PSIA, G, or R)

Torr

Resistivity

kohm-cm (kilo ohm-centimeters)

Mohm-cm

ohm-cm

Temperature

°C

°F

K

Voltage

mV

uV

V

 

Please contact support@earthsoft.com if additional unit conversions are needed.

 

 

Warning: Selecting 'Any' unit when setting up the form (in Collect Enterprise) will capture any unit that the data logger provides for the specified parameter (e.g., Temperature) and can be used if the unit is not known or not listed in Collect Enterprise. However, if the data logger provides more than one unit (e.g., °C and °F), then 'Any' could capture either °C or °F.